10
6200 Analogue Addressable Laser Beam Detector
The 6200 beam detector is an advanced analogue-addressable device that can be
connected and powered directly from the loop. An integrated transmitter-receiver with
a high efficiency reflector limits the wiring requirements to one end only and with a
range of up to 100 metres, the 6200 Beam Sensor offers twice the coverage of other
reflector beams.
Features
쐽
Microprocessor control.
쐽
Increased intelligence gives improved fire detection and a reduction of the number
of unwanted alarms caused by environmental influences.
쐽
Special algorithms automatically compensate for contamination of the lens and
reflector surfaces, providing ‘Drift Compensation’ similar to that incorporated in the
photo and photo-Thermal variants.
쐽
Automatic adjustment of the alarm threshold guarantees consistent alarm sensitivity.
쐽
Ideal for protection of very high and/or large open areas.
쐽
Integral horizontal and vertical adjustment.
쐽
Quality assured; independently certified to EN54-12 and EN60825-1, certified by VdS.
Specifications
Range : 10 - 100 m
Power supply : 15 - 28 VDC (via Intelligent loop)
Power consumption : 3.2 mA @ 20 VDC (in standby);
12 mA @ 20 VDC (in alarm);
12 mA @ 20 VDC (in fault);
12 mA @ 20 VDC (in contamination state)
< 40 mA @ 20 VDC (in installation mode)
NOTE: no more than one 6200 per loop should be put into the installation mode at one time
Operating temperature : -10°C to 55°C (operating); -20°C to 70°C (storage);
Relative humidity : <95%, non-condensing
Protection number : IP41
Dimensions : 195 mm x 150 mm x 155 mm (h x w x d)
Housing : grey, eggshell finish ABS
Weight : 1000 g
Accessories
쐽
6200-OBK : orientation bracket
쐽
6200 Filter : alarm test filter
쐽
REFL20 : short to medium range reflector (10 m - 30 m)
쐽
REFL60 : medium to long range reflector (30 m - 100 m)
Note: when ordering the 6200 Beam detector, please specify which reflector you require.
Accessories
M500K Addressable Glassbreak Manual Call Point
The M500K is a dedicated addressable call point for installation on a two wired
communication circuit providing both signalling of alarm to the monitoring control panel
and local LED indication of activation.
The M500K may be flush mounted to compatible electrical boxes, however, it is advised
that the terminal tray (ETT-P) is used to effectively terminate field wiring to the call point.
The ETT-P may be used with most standard recessed electrical boxes or the SR3T
surface mount box.
Features
쐽
Two wire connection for easy installation.
쐽
Suitable for flush mounting or surface mounting.
쐽
Simple rotary decade address setting.
쐽
Integral LED controlled from panel (blinks for valid polling, lights for alarm).
쐽
Not intended for use in an externally exposed or hazardous location.
Specifications
Minimum operating voltage : 15 VDC
Maximum operating voltage : 32 VDC
Standby current: : 300 µA (no communication) / 375 µA (1 communication per 5 s)
Alarm current : 5 mA
Housing : red thermoplastic
Dimensions : 86 mm x 86 mm x 52 mm (h x w x d)
Test key : included
Glass : excluded
SR3T Surface Mount Box
Red thermoplastic, surface mount box for the MK500 call point.
KG-1 Spare Glasses
Glass replacement; packed per 5 pieces.
The glass is laminated with transparent foil and has a diamond cut line to make breaking
easier and safe.
EMA24ALR Addressable Multi-alert Sounder
The EMA24ALR addressable sounders are designed for connection to analogue
addressable fire alarm systems. The EMA24ALR two wire loop-powered sounders receive
their power directly from the communication loop, and can be controlled via the digital
command from the panel.
(15 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals